TruAngle Page Order TruAngle TruAngle Instructions

The illustration below represents one of the most common condition that is the root cause of both factory & reload bottleneck ammunition that has excessive seated bullet run-out. The condition is where the case wall thickness is not uniform. The thinner side will be weaker and prone to yield verses the other thicker side. Now a good portion of the cases you work with have uniform wall thickness. These are the cartridges that come out of your press with little run-out. But, we all have cartridge cases where wall thickness is not uniform resulting in ammo that has run-out.

The TruAngle is used to correct this run-out. Straight ammo shoots uniform.